Including DM6 (8ft) Disc Mowers, DMP7 (9.2ft) Disc Mowers and DMP8 (10.5ft) Disc Mowers
Rear-mounted disc mower equipped with hydraulic lifting, automatic protection system to safeguard the bar from any obstacles, complete with freewheel cardan shaft, protective cloth, swath disc and automatic safety release. ENOCUT cutter bar in steel of the best quality built by Enorossi.
Automatic hydraulic tipping that protects the turf.
ENOROSSI lifting technology is a guarantee of this. When the mower is lowered, it always places the outer part on the ground first, while at the headland the inner part is always raised first. Thus, the sward can be optimally protected. Lifting takes place by means of a single-acting hydraulic distributor. The transition from the working position to the transport position is carried out easily without having to overturn the protection, therefore without the need to get off the tractor.
HYDRAULIC AUTOMATIC TILT THAT ALLOWS PROTECTING THE TURF
ENOROSSI lifting technology is a warranty. When the mower goes down, it always touches the ground with the external part. At the end of the field the first part lifting is the inner part. This way it is possible to fully protect the turf. The lifting is done by a single-acting hydraulic distributor. It is very easy to go from working position to transport position, you don’t even need to get off the tractor.
| Model | N° discs | Cutting width | Working speed | Blades for disc | RPM | HP | Weight |
| DM 4 | 4 | 167 cm. / 5.5 ft. | 10-14 km/h / 6-9 Mph | 2 | 540 rpm | 50 HP | 420 Kg. / 925 Lbs. |
| DM 4 3C | 4 | 167 cm. / 5.5 ft. | 10-14 km/h / 6-9 Mph | 3 | 540 rpm | 50 HP | 420 Kg. / 925 Lbs. |
| DM 5 | 5 | 205 cm. / 6.2 ft. | 10-14 km/h / 6-9 Mph | 2 | 540 rpm | 50 – 60 HP | 460 Kg. / 1014 Lbs. |
| DM 6 | 6 | 245 cm. / 8 ft. | 10-14 km/h / 6-9 Mph | 2 | 540 rpm | 50 – 60 HP | 500 Kg. / 1103 Lbs. |
| DM 6 3C | 6 | 245 cm. / 8 ft. | 10-14 km/h / 6-9 Mph | 3 | 540 rpm | 50 – 60 HP | 500 Kg. / 1103 Lbs. |
| DM 7 | 7 | 280 cm. / 9.2 ft. | 10-14 km/h / 6-9 Mph | 2 | 540 rpm | 70 – 80 HP | 640 Kg. / 1411 Lbs. |
| DM 8 | 8 | 320 cm. / 10.5 ft. | 10-14 km/h / 6-9 Mph | 2 | 540 rpm | 80 – 90 HP | 690 Kg. / 1522 Lbs. |
| DM 8 3C | 8 | 320 cm. / 10.5 ft. | 10-14 km/h / 6-9 Mph | 3 | 540 rpm | 80 – 90 HP | 690 Kg. / 1522 Lbs. |
A copy of the Enorossi 4 rotor tedder brochure can be downloaded from the Enorossi website or by clicking on the link below
