Available in multiple widths, these dual augers industrial grade snow blowers have 6-blade fans that make easy work of your lot. Each model is available with a rotating housing, allowing you to discharge either to the left or right of the blower, bypassing the chute completely for tighter control on blowing over shorter distances. Each model is also available with a truck loading chute, giving you additional height for easy clearance when blowing snow into trucks
Models 4097 4108 4120
HP (Rec.) 200 200 200
Cutting Width 97″ 108″ 120″
Main Body Height 47″ 47″ 47″
Mount CAT. 2 & 3 CAT. 2 & 3 CAT. 2 & 3
Impeller (Fan) 32″ – 3/8″ AR400 32″ – 3/8″ AR400 36″ – 3/8″ AR400
Impeller Depth 12″ 12″ 12″
Impeller Blades 6 6 6
Impeller Output Shaft 2 1/2″ 2 1/2″ 2 1/2″
Rotating Housing NA NA NA
PTO Drive (RPM) 1,000 1,000 1,000
Stages 2 2 2
Rotor Ribbon Flighting (Flight Notching Available)
Rotor (Tube) 4 1/2″ OD HEAVY WALL
Rotor (Flighting) 1/2 x 3 (bottom) 5/16 x 2-1/4 (top) 1/2 x 3 (bottom) 5/16 x 2-1/4 (top) 1/2 x 3 (bottom) 5/16 x 2-1/4 (top)
Rotor (Diameter) 23″ (bottom) 15″ (top) 23″ (bottom) 15″ (top) 23″ (bottom) 15″ (top)
Rotor (Drive Shaft) 1-3/4″ 1-3/4″ 1-3/4″
Roller Chain #100 #100 #100
Cutting Edge 1/2″ x 6″ Heat Treated Bolt-On 1/2″ x 6″ Heat Treated Bolt-On 1/2″ x 6″ Heat Treated Bolt-On
End Plates 3/8″ AR400 x 48″ high 3/8″ AR400 x 48″ high 3/8″ AR400 x 48″ high
Chute Diam. 13″ 13″ 13″
Chute Rotator Hyd. Hyd. Hyd.
Deflector Stages 2 2 2
Chute Deflector Hyd. Hyd. Hyd.
Work Light Kit Std. (TL Models Only)* Std. (TL Models Only)* Std. (TL Models Only)*
Weight 2,050 lbs. 2,130 lbs. 3,010 lbs.

4000 Series with Rotating Housing

Models 4097RH 4108RH 4120RH
HP (Rec.) 200 200 200
Cutting Width 97″ 108″ 120″
Main Body Height 47″ 47″ 47″
Mount CAT. 2 & 3 CAT. 2 & 3 CAT. 2 & 3
Impeller (Fan) 32″ – 3/8″ AR400 32″ – 3/8″ AR400 36″ – 3/8″ AR400
Impeller Depth 12″ 12″ 12″
Impeller Blades 6 6 6
Impeller Output Shaft 2 1/2″ 2 1/2″ 2 1/2″
Rotating Housing Std. Std. Std.
PTO Drive (RPM) 1,000 1,000 1,000
Stages 2 2 2
Rotor Ribbon Flighting (Flight Notching Available)
Rotor (Tube) 4 1/2″ OD HEAVY WALL
Rotor (Flighting) 1/2 x 3 (bottom) 5/16 x 2-1/4 (top) 1/2 x 3 (bottom) 5/16 x 2-1/4 (top) 1/2 x 3 (bottom) 5/16 x 2-1/4 (top)
Rotor (Diameter) 23″ (bottom) 15″ (top) 23″ (bottom) 15″ (top) 23″ (bottom) 15″ (top)
Rotor (Drive Shaft) 1-3/4″ 1-3/4″ 1-3/4″
Roller Chain #100 #100 #100
Cutting Edge 1/2″ x 6″ Heat Treated Bolt-On 1/2″ x 6″ Heat Treated Bolt-On 1/2″ x 6″ Heat Treated Bolt-On
End Plates 3/8″ AR400 x 48″ high 3/8″ AR400 x 48″ high 3/8″ AR400 x 48″ high
Chute Diam. 13″ 13″ 13″
Chute Rotator Hyd. Hyd. Hyd.
Deflector Stages 2 2 2
Chute Deflector Hyd. Hyd. Hyd.
Work Light Kit Std. (TL Models Only)* Std. (TL Models Only)* Std. (TL Models Only)*
Weight 2,500 lbs. 2,580 lbs. 3,460 lbs.